Documento | Mestrado |
Área | Estruturas de Concreto e Alvenaria |
Data da defesa | 18/06/1998 |
Autor | REIS, Andréa Prado Abreu |
Orientador | HANAI, João Bento de |
Português | |
Título | Reforço de vigas de concreto armado por meio de barras de aço adicionais ou chapas de aço e argamassa de alto desempenho |
Resumo
Neste trabalho estuda-se o comportamento de vigas de concreto armado reforçadas
mediante duas técnicas distintas de reabilitação: adição de armadura longitudinal no
bordo tracionado envolvida com argamassa de alto desempenho com ou sem fibras
de aço, ou fixação de chapa de aço, também no bordo tracionado, por meio de
argamassa de alto desempenho e conectores de aço. Inicialmente foi efetuado um
levantamento dos principais materiais usados em reparo/reforço e dos procedimentos
e recomendações indicados na literatura, para a reabilitação de elementos estruturais
de concreto armado. Apresentou-se ainda uma síntese dos estudos mais recentes
realizados nesta área de pesquisa e os resultados de alguns ensaios de vigas
recuperadas realizados por outros pesquisadores. Na seqüência, foram realizados
sete ensaios experimentais em vigas de concreto armado com seção transversal “T”,
de tamanho real, para avaliar a eficiência das duas técnicas de reabilitação propostas.
De acordo com os resultados obtidos percebe-se que vigas reabilitadas através da
adição de fibras de aço na argamassa que envolve a armadura complementar e de
conectores metálicos soldados na chapa de aço são eficientes. Além disso, é
imprescindível, nas vigas com chapas de aço, realizar uma boa ancoragem desses
elementos para evitar a ruptura prematura da peça. Finalmente foi constatado que os
resultados experimentais de outros pesquisadores indicam a viabilidade da
reabilitação por meio de técnicas semelhantes as empregadas neste trabalho.
|
|
Palavras-chave | Argamassa de alto desempenho. Elementos fletidos. Estruturas de concreto. Reabilitação. Recuperação. Reforço |
English | |
Title | Rehabilitation of reinforced concrete beams by means of additional steel bars or steel plate and high performance mortar. |
Abstract
This work deals with the behaviour of reinforced concrete beams rehabilitated using
two different techniques. One of these techniques consists of the addition of
longitudinal reinforcement embedded in a plain or steel fiber reinforced high
performance mortar at the tensioned face of the member. The second technique refers
to the attachment of a steel plate to the bottom face of the beam, using a high
performance mortar and steel connectors. Firstly, it was performed a research about
the materials that are most commonly used on repair/strengthening and the
recommendations prescribed in the available literature for reinforced concrete
members. The work also presents a synthesis of the recent researches in this area,
showing the results of some tests carried out by several authors. Next, seven
experimental tests were carried out on reinforced concrete T-beams, in full-scale, in
order to assess the efficiency of the two techniques mentioned. According to the
results obtained on these tests, it can be concluded that beams rehabilitated through
addition of steel fibers to the mortar used to cover the complementary reinforcement
and metallic connectors welded to the steel plate are efficient. Also, when using steel
plate, a good anchorage must be provided to prevent premature failure of the
member. Finally, it can be stated that the results obtained by other researchers
indicate that the rehabilitation of beams by means of the two techniques presented is feasible.
|
|
Keywords | Beams. High performance concrete. Rehabilitation. Reinforced concrete. Restoration. Strengthening |